Beth yw nodweddion o Incoloy 800H/800HT
INCOLOY 800H / 800HT
• ASTM B B 409% 2c B B 407% 2c B 564
�% a2 UNS Rhif N08810% 2fN08811
�% a2 Arall cyffredin enwau: Alloy 800% 2c Alloy 800H, Inconel® 800, Alloy 800HT
Incoloy 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization under high temperature exposure. These nickel steel alloys are identical, except for the higher levels of carbon in the 800H alloy, and the addition of up to 1.20% aluminum and titanium in the 800HT alloy. Incoloy 800 was the first of these alloys and was slightly modified to become Incoloy 800H. This improvement was made to control carbon (0.05-0.10%) and grain size to optimize stress cracking performance. Incoloy 800HT has a further modified total titanium and aluminum content (.85-1.20%) to ensure optimal high temperature performance. The nickel alloy is dual certified (800H/HT), offering the properties of both forms. Incoloy 800H/HT alloy is suitable for high temperature structural applications. The nickel content makes the alloy highly resistant to both chloride stress corrosion cracking and embrittlement by sigma phase precipitation. Generally corrosion resistance is very good. Under solution annealed conditions, 800H and 800HT alloys have excellent creep and stress rupture properties.


Incoloy 800 yw yn bennaf defnyddio ceisiadau gyda tymheredd i 1100 gradd F, lle 800H a 800HT aloion yn ddefnyddir yn tymheredd uchod gradd F lle ymwrthedd ymgripiad yn angen. Mae'r cemegol cydbwysedd yn caniatáu nicel aloi i arddangos rhagorol ymwrthedd i carburizing, ocsideiddio a nitriding atmosfferau. Incoloy 800HT bydd nid dod brittle hyd yn oed ar ôl defnydd hir yn y %{6}}% 7d gradd F gradd F range, sydd llawer di-staen duroedd can yn dod. 800HT arddangosion rhagorol oer ffurfio priodweddau nodweddiadol gyda nicel-cromiwm aloion. Pan oer ffurfio, y grawn maint cynhyrchu A yn amlwg undulating surface hysbys "orange peel." Incoloy 800HT can be welded drwy technegau yn gyffredin defnyddio ar di-staen dur.
Beth ffurflen o Incoloy�% ae800H/HT are are available?
Stripiau, platiau, bariau, weldio a di-dor pibellau, ategolion (hy flanges, weldio, gwddf soced weldio, penelinoedd, Tees,), gwifren rhodenni,
Alloy 800 (UNS N08800) Cemegol cyfansoddiad, %
Ni Cr Fe C Al Ti Al+Ti
30.0-35.0 19.0-23.0 39.5 min .10 max .15-.60 .15-.60 .30-1.20
Alloy 800H (UNS N08810) Cemegol cyfansoddiad% 2c %
Ni Cr Fe C Al Ti Al+Ti
30.0-35.0 19}.0-23}.{}.5 min .05-.10 .15-.60 .15-.60 .30-1.60 .30-1.20
Alloy 800HT (UNS N08811) Cemegol cyfansoddiad, %
Ni Cr Fe C Al Ti Al+Ti
30.0-35.0 19}.0-23}.{}.5 min .06-.10 .25-.60 .25-.60 0.{{}.85-1.2
Beth are nodweddion o Incoloy 800H/HT?
�% a2 tymheredd uchel cryfder
�% a2 uchel ymgripiad rupture cryfder
% e2% 80% a2 Gwrthiannol i ocsidiad a carburization mewn uchel tymheredd amgylcheddau
�% a2 Da cyrydiad ymwrthedd mewn llawer amgylcheddau asidig
• Good resistance to many sulfur-containing atmospheres
In what applications is Incoloy 800H/HT used?
�% a2 ethylen ffwrnais quenching boeler
% e2�% a2 Hydrocarbon cracio
�% a2 Falfiau, ffitiadau a cydrannau eraill agored i cyrydol ymosodiad rhwng {}} gradd F
�% a2 Diwydiannol ffwrneisi
�% a2 Gwres triniaeth offer
�% a2 Cemegol a petrocemegol prosesu
�% A2 Superheaters a reheaters mewn pŵer planhigion
�% a2 pwysau llongau
�% a2 gwres cyfnewidydd
Alloy 800H/HT is used in a variety of applications including those exposed to corrosive environments and high temperatures, such as heat treatment equipment, chemical and petrochemical processing, nuclear power plants and the pulp industry. Use Incoloy 800H/HT for heat treatment equipment such as baskets, trays and fixtures. The chemical and petrochemical processing industries use these alloys in heat exchangers and other piping systems in small acid media, particularly where resistance to chloride stress corrosion cracking is required. Power plants use them for superheater and reheater ducting.





